Fire Fighting Global Leader!

Automatic Fire Extinguishing System

FM Automatic Fire Extinguishing System (High Pressure CO2)

Product Overview

   The automatic fire extinguisher for FM is a high-pressure CO2 digital fire extinguishing system and it is an automatic fire extinguisher system developed in order to protect state-of-theart equipment such as semiconductor, LCD production equipment, machinery equipment, unmanned communication equipment, and computing equipment, etc. in conjunction with various fire sensors. It is the one and only Wet-Bench fire extinguishing system acquired the FM certification within the country and it is able to perform the real-time monitoring on the real-time event status of fire sensor as well as various input & output status of the automatic fire extinguisher through the bidirectional communication.

Major Features

⊙ The control panel with LCD display
⊙ The control panel basically includes address setting and history storage function. The LCD display notifies the user of the alarm      time of the detector, the fault condition, and which detector is activated.
⊙ The CO2 provides clean and efficient digestion
⊙ The CO2 is non-conductive and clean. There are no side effects on clean room environments and protective equipment after CO2      emissions
⊙ High quality, high performance

Major Application Areas

   The automatic fire extinguishing system is a system developed in order to protect expensive high-tech equipment or facilities such as semiconductor, LCD production equipment, machinery equipment, unmanned communication equipment, and computing equipment, etc. in conjunction with various fire sensors. It is a system developed to minimize the damage to relevant equipment at the time of extinguishing the fire by using the GAS extinguishing agent. The automatic fire extinguishing system can prevent and minimize enormous loss of life and property damage caused by fire since it is able to perform the real-time monitoring on not only various input & output status the automatic fire extinguisher, but also real-time temperature change and condition of the digital temperature controller in the central disaster prevention center without a separate communication repeater owing to its own built-in communication module

Product Specification
작성폼
Model Name CP-100LB
Extinguishing Agent Carbon Dioxide (CO2)
Weight of the Extinguishing Agent 100 lbs (45.4 kg)
Size 550mm(W) x 430mm(L) x 1930mm(H)
Color Ivory
Weight 220 kg
Operating Temperature 0 to 49°C (CO2 Cylinder: -18°C to 49°C)
Input Voltage AC 110-120 V / AC 220-240 V (50-60Hz)
SMPS Output DC 24V, 4A, 96W
Battery 12V DC Batteries x 2 (total 24 VDC, 15 Ah)
Function
작성폼
Number of Zone 2 types (And / Or Mode Selectable)
User Emission Delay Timer 0-60 seconds
Dual Manual Release Pull Station, Push Button
Built-in Test Function Input & Output Signal Test
LCD Screen Display 3.2-inch LCD Interface
Password Function Password can be set
Event Save 10,000 cases